Table of Contents
- Introduction
- Importance of Installation Height
- Solid Tiles as a Base
- Leveling Unevenness
- Preventing Tiles from Showing Through
- Proper Planning of Expansion Joints
- The Rewarding Result
- Conclusion
Introduction
Laying click vinyl over tiles is an attractive and practical way to give your room a new look. It combines durability, style, and easy maintenance. For those who want to replace their existing tiles with click vinyl, there are important aspects to consider to achieve an optimal result.
Importance of Installation Height
The installation height is a crucial factor during the planning phase. It includes the thickness of the click vinyl as well as any required impact sound insulation. It is important to ensure that door leaves do not scrape against the new floor. This is especially relevant in rental apartments where adjustments to door frames are often not possible.
Solid Tiles as a Base
Before you start laying the click vinyl, you should carefully check the condition of the existing tiles. Loose or wobbly tiles must be fixed or replaced to ensure the stability of the new floor and to avoid disturbing noises.
Leveling Unevenness
Over time, tiles can become uneven or develop cracks. Such irregularities can affect the stability and appearance of the new click vinyl floor. Therefore, it is advisable to repair all unevenness with leveling compound or filler before installation to create a flat substrate.
Preventing Tiles from Showing Through
A problem, especially with thinner click vinyl, is the tiles underneath showing through. To achieve a uniform and appealing look, you should either fully fill the substrate before installation or use a suitable underlay.
Proper Planning of Expansion Joints
Click vinyl expands depending on temperature and humidity. Therefore, it is important to plan expansion joints at the edges of the room as well as around fixed installations. These joints allow the floor to move freely without damage. Ignoring these joints can lead to buckling or cracks in the floor.
The Rewarding Result
After all preparations are complete, you can start laying the click vinyl. The process is comparatively easy thanks to the click system. The newly laid floor not only provides a visual upgrade to your room but also improved impact sound insulation and easy maintenance.
Conclusion
Laying click vinyl over tiles is an excellent way to give your room a fresh and modern look. With careful preparation and attention to all relevant aspects, the project can be successfully implemented. The result is a durable, attractive, and practical flooring that enhances your home.